Golfcourse and Sportsharrow Print
Hatzenbichler.com

Use of the machine:
  • working in of sand and wormdung
  • cleaning of dead grass, moss etc.
  • weed control
  • airing the turf
  • flexible harrow section (good adaptation on the ground)
  • central adjustment of the tine pressure on the ground ( 10 positiones)
  • parallelogram guidance, tine pressure regulation by remote control (only semi-trailed models)
  •  three point attachment CAT I / CAT II
  • rubber pressing rollers (adjustable)
  • sprung levelling bar
  • three rows spring tines, angle to the ground adjustable
  • working widths 2,50m, 3,00m, 4,50m, 5,00m and 6,00m



Golf harrow

working width 6,00m

1111



Golf harrow - verticutting machines
working width from 1,50m to 6,00m

Equipment:
  • Three-point attachment Cat. 1 and Cat. II
  • Moving harrow section
  • 6 tine rows (10mm distance between tines)
  • 5mm special spring tines with offset
  • 10mm hole plate
  • Rubber support wheels
  • Parking support
  • Working widths from 1.50m 50 6.00m

All machines are powder-coated

222



Seeding and reseeding machines (mechanical)
working width from 1,50m to 3,00m

Equipment:
  • Three-point attachment cat 1 and cat II
  • Moving harrow section
  • 6 tine rows (10mm distance between tines)
  • 5mm special spring tines with offset
  • 10mm hole plate
  • Parking support
  • Working widths from 1.50m 50 3.00m
  • Mechanical seed box with ground-wheel drive (broadcast seed)
  • Calibration tray
All machines are powder-coated

3333



Seeding and reseeding machines (pneumatic)
working width from 1,50m to 6,00m

Equipment:
  • Three-point attachment cat 1 and cat II
  • Moving harrow section
  • 6 tine rows (10mm distance between tines)
  • 5mm special spring tines with offset
  • 10mm hole plate
  • Parking support
  • Working widths from 4.50m 50 6.00m
  • Pneumatic drill box „Air 16“
  • PTO drive blower
  • Electr. control unit - seed quantity distribution from the tractor seat
  • Large fi ll platform
All machines are powder-coated

4444

4444